Sign
SIGN AUDIO Technology Interconnects
The basic concept and the main design criteria for SIGN®AUDIO Technology's Research & Development team was to create a cable with more signal and less interference.
Those who have more experience with using Interconnects will immediately confirm the enormous influence an Interconnects has on the total soundimage.
A signal will never exit a component better than it has entered it. So between two components is a very important connection!
SIGN®AUDIO Technology Interconnects are one of the better Interconnects available. The enthousiastic feedback we receive from satisfied costumers proves that.
People just underestimate the influence a good Interconnect has on the total audioset. The soundimage becomes wider, more transparant, more detailed and
the SIGN®AUDIO Technology Interconnect is able to define all diferent instruments. The music doesn't seem to come out of the loudspeaker anymore but is
produced through the total room. Almost holographic.
By using a special protective polymere shielding around its copper cores the magnetic fields produced by for instance mobile phones and computers have no
effect on the signal. An extremely accurate productionproces and the use of FEP® as an isolator makes this the perfect Interconnect.
SIGN®AUDIO Technology Interconnects are mounted with WBT-0144 RCA connectors or NEUTRIK NC3 XLR connectors.
The WBT-0144 connector has all the style and finesse. They include a barrel finished in matte black, efficient machining tolerances and lesser percentage oxygen free copper alloy stock.
The NEUTRIK NC3 XLR Exclusive "High End" connectors are 3-pole male / female XLR cable connector with integrated capacitive shield to shell connection to
avoid RF-interference and LF-noise. Premium velour chromium plating provides soft satin finish and an extra high temperature resistant insulator.
Just follow the sign.
Sign Interconnect RCA
Sign Interconnect XLR
Sign Interconnect Extended
Sign SP/DIF Digital Interconnect
Sign AES-EBU Digital Interconnect
SIGN AUDIO Technology Powercords/Powersources
SIGN AUDIO Technology Powercords and powersource are a critical key in the chain. The influence they have are as important as a good Interconnect or Loudspeakercable.
The problems conventional (non-shielded) powercords cause are dual: External RFI and EMI signals will have a negative influence on the powersignal.
Various sorts of pollution will be either blocked or eliminated:
- All external interference.
- All internal interferences coming from other devices.
Expect the sound to be more transparant, extremely balanced, more detailed, and have more bass.
The powersource was produced with only one objective: to have the best powersource for your equipment. All experience and years of development
at SIGN®AUDIO Technology resulted in a powersource which can take on any other powersource.
Both soundquality and buildquality, where only the best materials have been used, make this an outstanding powersource. With the SIGN AUDIO
Technology Powersource you will have an impressive, but very simple enhancement for your complete set.
A good powersource is an essential part of the configuration end has an enormous influence on your set. Often a “cheap” Powersource is
used in combination with more expensive Powercords. The lost signal after the “cheap” Powersource can't be made up by the expensive Powercords anymore.
Sign Powercord 15A
Sign Powercord 20A
Sign Powersource with 6 Schuko sockets
SIGN AUDIO Technology Loudspeakercables
SIGN AUDIO Technology Loudspeakercables are exceptional. Both in soundquality as in buildquality.
Extremely quiet and expressive. These cables are perfectly balanced en very neutral: they will not enhance any signature to the sound and are able to
create a complete threedimensional image. This makes a SIGN®AUDIO Technology Loudspeakercable unique and difficult to improve any further.
The SIGN AUDIO Technology Research & Developmentteam really made the impossible possible: every instrument and all vocals are threedimensional
and the quitness is impressive.
The cables are handmade with most care and proffesionality, which you can see instantly. This is a qualitycable.
SIGN AUDIO Technology loudspeakercables have completely seperated cores.
A stereoset cables exist of 4 completely seperated cores. The shotgun version even doubles that to have an even better signal. The Extended version
has extra shielded litzes for the best possible signal.
SIGN AUDIO Technology loudspeakercables are mounted with WBT-0661 Cu nextgen spade plug in copper with 6 mm forks, or with WBT-0644 Banana plugs in 6 or 8 mm.
WBT-0661 Cu nextgen spade plug is an 1/4 inch / 6.4mm sandwich spade connector. Pure Oxygen Free Copper contact is direct Gold plated to protect
against oxidation. High current spade lug with elastomeric shock absorber for progressive contact pressure eliminating structure born and air born noise
as well as magnetostriction. Fully insulated body is safe to use and conforms to international safety standards.
The WBT-0644 Banana plugs in 6 or 8 mm have the same style and elegance. They include a barrel finished in matte black, efficient machining tolerances
and Oxygen Free Copper alloy stock.
Just follow the sign.
Sign Loudspeaker Pass Series
Sign Loudspeaker Shotgun Series